術檢報告.....看不太懂呀 - 雷射眼睛

今天去馬偕做術前
要了一份報告回來
但看得很頭大
只了解一小部份
也不知是對是錯
早知道就直接問醫生啦 = ="

1.請問這份報告如何判斷左右眼?
2.請問這份報告有我近視的度數嗎?
3.請問角膜厚度是看Thinnest還是Thick?
4.還有這份報告應該沒有說我有無乾眼吧?
5.醫生說我瞳孔過大,術後有眩光現象
但我看板上很多人都比我大呀!!
他說雷射是可以做到這麼大啦,
只是會更損角膜厚度,那我到底是不適合動手術呀?
6.有人懂這份資料全部數據的意義嗎?

結論:醫院人真多,醫生真冷漠,
再多去幾家做術前看看


第一隻眼 http://0rz.tw/nd6YZ
OS
__________________________________
Sim K's Astig: 1.6D @ 93deg <---這是散光度數嗎?
Max: 43.3D @ 93deg
Min: 41.7D @ 3deg
_________________________________
3.0MM Zone: lrreg: +-1.2D
Mean Pwr 42.4 +-0.9D
Astig Pwr 1.8 +-0.8D
Steep Axis 93 +-23deg
Flat Axis 3 +-23deg
________________________________
5.0MM Zone: lrreg: +-1.2D
Mean Pwr 42.1 +-0.8D
Astig Pwr 1.4 +-0.9D
Steep Axis 88 +-25deg
Flat Axis 180 +-25deg
________________________________
White-to-White[mm]:11.7
Pupil Diameter[mm]: 5.8 <---瞳孔直徑
Thinnest:529 um @ (-0.2,-0.8) <---角膜最薄厚度
ACD(Endo):2.98mm
Kappa:2.96 @ 296.48
Kappa Intercept:-0.06,-0.07
______________________________

第二隻眼 http://0rz.tw/4hjjx
OD
__________________________________
Sim K's Astig: 2.0D @ 91deg
Max: 43.7D @ 91deg
Min: 41.7D @ 1deg
_________________________________
3.0MM Zone: lrreg: +-0.8D
Mean Pwr 42.4 +-0.4D
Astig Pwr 1.8 +-0.6D
Steep Axis 93 +-8deg
Flat Axis 3 +-8deg
________________________________
5.0MM Zone: lrreg: +-1.0D
Mean Pwr 42.1 +-0.6D
Astig Pwr 1.4 +-0.7D
Steep Axis 88 +-21deg
Flat Axis 180 +-20deg
________________________________
White-to-White[mm]:11.7
Pupil Diameter[mm]: 5.7
Thinnest:529 um @ (-0.3,-0.2)
ACD(Endo):3.03mm
Kappa:2.01 @ 243.22
Kappa Intercept:-0.27,-0.25
______________________________

--
In the Dark.....

http://www.wretch.cc/blog/ZRR

--